Super Duplex 2507 Orifice Flanges Manufacturers in Dubai | Suppliers | Stockists | Exporters - Super Duplex 2507 Flanges | Super Duplex 2507 Flanges Importers |Super Duplex 2507 Weld Neck Flanges Suppliers | Super Duplex 2507 Flanges Stockists

Super Duplex 2507 Flanges

  • Home
  • Super Duplex Flanges

Super Duplex 2507 Orifice Flanges, Super Duplex 2507 Orifice Flanges Manufacturers, Super Duplex 2507 Orifice Flanges Suppliers, Super Duplex 2507 Orifice Flanges Stockists, Super Duplex 2507 Orifice Flanges Exporters - Super Duplex 2507 Flanges, Super Duplex 2507 Blind Flanges Manufacturers, Super Duplex 2507 Weld Neck Flanges Suppliers, Super Duplex 2507 Slip On Flanges Exporters, Super Duplex 2507 High Hub Blind Flange Stockists.

Super Duplex 2507 Orifice Flanges in Dubai, Super Duplex 2507 Pipe Flanges Manufacturers in Dubai, Super Duplex 2507 Reduced Flanges Suppliers in Dubai, Super Duplex 2507 Slip On Flanges Exporters in Dubai, Super Duplex 2507 Lap Joint Flanges Stockists in Dubai.-Super Duplex 2507 Orifice Flanges Manufacturers In Dubai, Super Duplex 2507 Orifice Flanges Suppliers In Dubai, Super Duplex 2507 Orifice Flanges Stockists In Dubai, Super Duplex 2507 Orifice Flanges Exporters In Dubai

Super Duplex 2507 Flanges

Super Duplex 2507

Super Duplex flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. Super duplex 2507 flange are not suitable for high or low temperature service. Super Duplex Stainless Steel Flanges has low hot strength, so it may need support during heat treatment or forging. It has good high temperature oxidation resistance, like other duplex stainless steels they suffer from embrittlement if held for even short times at temperatures above 300°C. They are Hot forging should also be followed by solution treatment.

Super duplex steel flanges is usually welded or screwed, they provide easy access for cleaning, inspection or modification. It is comprised with three parts i.e, pipe flange, blotting and gasket. It can be heated at 1040 - 1120°C and cool rapidly in air or by water quenching. Its joints are made by bolting together two flanges with a gasket between them to provide a seal.

A182 Super Duplex Flange adds flexibility while maintaining piping systems by allowing for easier disassembly and improved access to system components, they are typically in welded or threaded form. Super Duplex Pipe Flanges are of many types such as super duplex socket weld flange, super duplex lap joint flange, super duplex slip on flange, super duplex blind flange and super duplex weld neck flange, super duplex threaded flange, super duplex screwed flange, etc.

All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product delivered is of finest quality

Specification Schedule of Super Duplex 2507 Flanges

Specifications ASTM A182 / ASME SA182
Duplex Steel Flanges Standards ANSI/ ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
ASTM A182 Duplex Steel Flange HS Code Duplex Steel Flange HS Code : 7307
Duplex Steel Flanges Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Stainless Steel Duplex Flanges Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Manufacturer and supplier
Duplex Flanges Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Duplex Stainless Flanges Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
ASME B16.5 Duplex Steel Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Stainless Steel Duplex Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Duplex Steel Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
ASTM A182 Duplex Steel Flange supporting material Gasket, Ring Joint, Flange Bolts
ASTM A182 Duplex Steel Flanges Production technique
  • Forged, Heat treated and machined
Duplex Flanges Main Types Forged / Threaded / Screwed / Plate
Most common types of Duplex Steel Flanges
  • Weld Neck Ring Flanges (WNRF)
  • Slip-On Ring Flanges (SORF)
  • Blind Ring Flanges (BLRF)
  • Socket Weld Ring Flanges (SWRF)
  • Threaded Ring Flanges
  • Lap Joint Ring Flanges (LJRF)
  • Ring Type Joint Flanges (RTJF)
Duplex Flange Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Large Male-Female (LMF), Flat Face (FF), Small Male-Female (SMF), Lap-Joint Face (LJF), Small Tongue, Large Tongue & Groove Manufacturer and supplier
Duplex Steel Flange Test X-ray detector, Direct-reading Spectrograph, Hydrostatic testing machine, UI trasonic flaw detector, Magnetic particle detector
Equipment for DSS Flange Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Duplex Flanges Origin Dubain / West Europe / Japan / USA / Korean (Strictly No china)
Duplex Flanges Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations
Key markets and industries for Duplex Steel Flanges
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Duplex Steel Flanges Standard
  • ANSI Flange
  • JIS/ KS Flange
  • API 6A Flange
  • ASME Flange
  • DIN Flange
  • EN1092-1 Flange
  • UNI Flange
  • BS4504 Flange
  • GB Flange
  • AWWA C207 Flange
  • GOST Flange
  • PSI Flange
Duplex Steel Flanges Application
  • Duplex Stainless Flange used to Connect Pipe & Tubes in Shipbuilding Petroleum, Gas, Chemical, Construction, Power, Metallurgy,etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Chemical Properties of Super Duplex 2507 Flanges

Grade C Mn Si P S Cr Mo Ni N Fe
Super Duplex S32750 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min
Super Duplex S32760 0.05 max 1.00 max 1.00 max 0.030 max 0.010 max 24.00 – 26.00 3.00 – 4.00 6.00 – 8.00 0.20 – 0.30 57.61 min

Mechanical Properties of Super Duplex 2507 Flanges

Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
Super Duplex S32750/S32760 7.8 0.281 1350 2460

Equivalent Standard of Super Duplex 2507 Flanges

STANDARD WERKSTOFF NR. UNS
Super Duplex S32750/S32760 1.4410 S32750 / S32760

Basic Type of Super Duplex Flanges

Super Duplex Steel Flanges

ASTM A182 Super Duplex Flanges

Super Duplex Steel Flanges

AISI Super Duplex Flanges

Super Duplex Steel Flanges

ANSI Super Duplex RTJ Flanges

Super Duplex Steel Flanges

ASME B16.5 Super Duplex Flanges

Super Duplex Steel Flanges

Super Duplex Header Flanges

Super Duplex Steel Flanges

ANSI B16.5 Super Duplex Forged Pipe Flanges

Super Duplex Steel Flanges

DN15 Super Duplex Flat Welding Flange

Super Duplex Steel Flanges

ASME B16.5 Super Duplex Threaded Flanges

Super Duplex Steel Flanges

Super Duplex KF Blank Flanges

Super Duplex Steel Flanges

Super Duplex Pipe Flanges

Super Duplex Steel Flanges

Super Duplex Threaded Flanges

Super Duplex Steel Flanges

Super Duplex Blind Flanges

Domestic Area

Mumbai Ahmedabad Bhopal Bikaner Pune
Delhi Chennai Visakhapatnam Mangalore Nagpur
Bangalore Kolkata Siliguri Assam Indore
Hyderabad Surat Nashik Cochin Thane
Faridabad Rajkot Aurangabad Bhavnagar Ranchi
Mysore Coimbatore Tirupur Salem Bikaner
Bhubaneswar Raipur Ankleshwar Bhilai Bhiwandi
Vadodra Kochi

Our Exports

India Bahrain Kuwait Dubai Iraq Oman
Qatar Saudi Arabia United Arab Emirates Philippines Vietnam United States
Brazil South Korea Turkey Nepal United Kingdom Italy
Singapore Kenya Ghana South Africa China New Zealand
Sri Lanka Belgium Hungary Poland France Germany
Australia Taiwan Ireland Indonesia Canada Mexico
Spain Malaysia Nigeria Morocco Portugal kazakhstan
Israel Netherlands Peru Japan Thailand Egypt
Hong Kong Argentina Ukraine Romania Russia England

People Also Search For

Alloy Steel 13CrMo44 Tubes, Alloy Steel 13CrMo44 Welded Rectangular Tubes Manufacturers, Alloy Steel 13CrMo44 Seamless Tube Suppliers, Alloy Steel 13CrMo44 Marine Exhaust Tube Exporters, Alloy Steel 13CrMo44 Polished Decorative Tube Stockists, Alloy Steel 13CrMo44 Square Tube in Dubai, Alloy Steel 13CrMo44 Tubes Manufacturers in Dubai, Alloy Steel 13CrMo44 Rectangular Tube Suppliers in Dubai, Alloy Steel 13CrMo44 Hydraulic Tube Exporters in Dubai, Alloy Steel 13CrMo44 ERW Tubes Stockists in Dubai.