Stainless Steel F31 Flanges, Stainless Steel F31 Flanges Manufacturers, Stainless Steel F31 Flanges Suppliers, Stainless Steel F31 Flanges Stockists, Stainless Steel F31 Flanges Exporters
Stainless Steel F31 Flanges Manufacturers In Ghana, Stainless Steel F31 Flanges Suppliers In Ghana, Stainless Steel F31 Flanges Stockists In Ghana, Stainless Steel F31 Flanges Exporters In Ghana
Stainless Steel F321 Flanges
ASTM A182 Grade F321 additionally has great low temperature strength and is non-attractive in the strengthened condition. SA182 F321 has a great weldability and can be handily welded by all standard combination techniques, both with and without filler metals and it not need post weld heat treatment, there is valuable for the applications like substance preparing, petrol refining, food handling, aviation, drug creation, and so on. ASTM A182 Gr F321H Slip on and Lap Joint Flanges comprises of two sections, a stub end and the sponsorship flange.
SA 182 F321H Weld Neck Flanges contains a round fitting with a look edge around the boundary. Normally machined from a manufacturing, which is ordinarily butt welded to a line. It slides over the line and the stub end is the association where the gasket sits. ASTM A182 321H Threaded Flanges is the uncommon kind of flanges which can be connected to the line without welding the spine. It is strung in the drag which coordinates with an outer string on the line. It is actually similar to a slip-on pipe ribs that are utilized with pipes that have outside strings. It very well may be utilized where little width and high pressing factor is required. UNS S32109 Orifice Flanges is utilized in mix with hole meters to gauge the stream pace of oil, gas and different fluids passed on by the pipeline.
ASTM A182 321H Stainless steel Long Weld Neck Flanges utilize a since a long time ago, tightened center that expands the thickness of line from the weld right to the essence of the spine. This plan guarantees that the pressure made inside by the progression of high-pressure fluid is moved to the line, hence decreases the weight on the actual flanges. ASTM A182 F321H Stainless Steel Flanges is an austenitic material which can be stabilized by the addition of Titanium, they are made by bolting together two flanges with a gasket between them to provide a seal. It can be usually utilized for applications in temperatures up to 1,650 ℉. SS 321H Blind Flange is a flange that does not have a hub or a bored center. It has a face thickness of a flange, a matching face type, and similar bolting pattern. It can be used to seal a nozzle opening on a pressure vessel.
All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product delivered is of finest quality
Specification Schedule of Stainless Steel F31 Flanges
| Standard Specifications | ASTM A182 / A240 & ASME SA182 / SA240 |
|---|---|
| Dimensions | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Standard |
|
| Size / Range | 1/2 inch (15 NB) - 48 inch (1200NB) DN10~DN5000 or special sizes |
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove Manufacturer and Supplier |
| Pressure Rating ANSI | Class 150, 300, 600, 900, 1500, 2500 |
| Pressure Calculation in DIN | 6Bar 10, 16, 25, 40 and PN6 PN10 PN16 PN25 PN40, PN64 |
| JIS | 5K, 10, 16 20, 30, 40, 63 |
| UNI | 6Bar, 10, 16, 25, 40 |
| EN | 6Bar, 10, 16, 25, 40 |
| Most common types of | Threaded, Screwed, Plate, Forged |
| Manufacturer Test Certificates | EN 10204 3.1B Third Party Inspection Report 100% Radiography Test Report Raw Materials Certificate |
| Production technique |
|
| Special design | As per your drawing
AS, ANSI, BS, DIN and JIS |
| Origin | Ghanan, West Europe, Korean USA, Japan, |
| Uses & application |
|
| Pipe Marking | All SS 304 Flanges are marked as follows: Supplier or Manufacturer's Name, NPS, Flange Class, ASME B16.5, Material Specification, Trade mark |
| Flange manufactured as per |
|
Chemical Properties of Stainless Steel F31 Flanges
| SS 321 | |
|---|---|
| Ni | 9 – 12 |
| Cr | 17 – 19 |
| C | 0.08 max |
| N | 0.10 max |
| Fe | Balance |
| Mn | 2 max |
| Si | 0.75 max |
| S | 0.03 max |
| P | 0.045 max |
| Ti | 5xC min 0.60% max |
Mechanical Properties of Stainless Steel F31 Flanges
| Density | 8.0 g/cm3 |
|---|---|
| Melting Point | 1454 °C (2650 °F) |
| Tensile Strength | Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
| Elongation | 35 % |
Equivalent Standard of Stainless Steel F31 Flanges
| ASTM | STANDARD | WNR | UNS | JIS | EN |
|---|---|---|---|---|---|
| A182 | SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
Basic Type of Stainless Steel Flanges
ASTM A182 F321 SS Flanges
AISI F321 SS Flanges
ANSI F321 SS RTJ Flanges
ASME B16.5 SS F321 Flanges
F321 SS Header Flanges
ANSI B16.5 SS F321 Forged Pipe Flanges
DN15 F321 SS Flat Welding Flange
ASME B16.5 SS F321 Threaded Flanges
F321 SS KF Blank Flanges
F321 SS Pipe Flanges
F321 SS Threaded Flanges
F321 SS Blind Flanges
Domestic Area
| Mumbai | Ahmedabad | Bhopal | Bikaner | Pune |
|---|---|---|---|---|
| Delhi | Chennai | Visakhapatnam | Mangalore | Nagpur |
| Bangalore | Kolkata | Siliguri | Assam | Indore |
| Hyderabad | Surat | Nashik | Cochin | Thane |
| Faridabad | Rajkot | Aurangabad | Bhavnagar | Ranchi |
| Mysore | Coimbatore | Tirupur | Salem | Bikaner |
| Bhubaneswar | Raipur | Ankleshwar | Bhilai | Bhiwandi |
| Vadodra | Kochi |
Our Exports
People Also Search For
Stainless Steel F31 Flanges, Stainless Steel F31 Blind Flanges Manufacturers, Stainless Steel F31 Weld Neck Flanges Suppliers, Stainless Steel F31 Slip On Flanges Exporters, Stainless Steel F31 High Hub Blind Flange Stockists, Stainless Steel F31 Orifice Flanges in Ghana, Stainless Steel F31 Pipe Flanges Manufacturers in Ghana, Stainless Steel F31 Reduced Flanges Suppliers in Ghana, Stainless Steel F31 Slip On Flanges Exporters in Ghana, Stainless Steel F31 Lap Joint Flanges Stockists in Ghana.