ASTM A515 Gr 60 Carbon Steel Sheets & Plates, ASTM A515 Gr 60 Carbon Steel Sheets & Plates Manufacturers, ASTM A515 Gr 60 Carbon Steel Sheets & Plates Suppliers, ASTM A515 Gr 60 Carbon Steel Sheets & Plates Stockists, ASTM A515 Gr 60 Carbon Steel Sheets & Plates Exporters
ASTM A515 Gr 60 Carbon Steel Sheets & Plates Manufacturers In Belgium, ASTM A515 Gr 60 Carbon Steel Sheets & Plates Suppliers In Belgium, ASTM A515 Gr 60 Carbon Steel Sheets & Plates Stockists In Belgium, ASTM A515 Gr 60 Carbon Steel Sheets & Plates Exporters In Belgium
ASTM A515 Gr 60 Carbon Steel Sheets & Plates
ASTM A515 Gr. 60 Carbon Steel Plates using temperature normally only up to 750 Degree D – 780 Degree C, in the higher temperature of the heat used parts, used the nickel refractory metal. ASTM A515 Gr 60 Plates, which is useful in major industrial areas. ASTM A515 Grade 60 is a kind of steel material that is used to fabric middle or high-temperature pressure vessels. ASTM a 515 gr 60 CS Plate is called "intermediate-temperature pressure vessel plates" or "higher-temperature pressure vessels. The usual annealing temperature of ASME SA 515 Gr. 60 CS Coils is approximately 1900 Degree F (1040 Degree C). In the aeronautical field, ASTM A515 Gr. 60 CS Coils are used for various engine and airframe components that must withstand high temperatures.
Laboratory tests of ASME SA 515 Gr. 60 Carbon Steel Coils at 200 Degree C (390 Degree F) in contaminated 95 % super phosphoric acid showed corrosion rates. Light forming of ASTM A515 Gr. 60 Carbon Steel Slitting Coils can be done at temperatures down to 1600 Degree F (870 Degree C). Above about 20 % sulphuric acid, ASME SA 515 Gr. 60 Carbon Steel Perforated Coils is even more resistant than stainless steel. The behavior of ASTM A515 Gr. 60 CS Plates during cold forming is similar to that of other alloys.
All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product delivered is of finest quality
Specification Schedule of ASTM A515 Gr 60 Carbon Steel Sheets & Plates
| Grade |
ASME SA 515 GR.60 Boiler and Pressure Vessel Steel Plates |
| Width |
1500mm-3000mm |
| Thickness |
3mm-600mm |
| Length |
3000mm-11000mm. |
| Production |
Hot-Rolled (HR) |
| Heat Treatment |
Rolled/Normalised/N+T/QT |
Chemical Composition of ASTM A515 Gr 60 Carbon Steel Sheets & Plates
| C |
Si |
Mn |
P |
S |
Al |
Cr |
Cu |
Ni |
Mo |
Nb |
Ti |
V |
| 0.18 |
0.4 |
0.95/1.50 |
0.015 |
0.008 |
0.02 (Min) |
0.3 |
0.3 |
0.3 |
0.08 |
0.01 |
0.03 |
0.02 |
Mechanical Composition of ASTM A515 Gr 60 Carbon Steel Sheets & Plates
| Tensile strength (ksi) |
Yield strength (ksi) |
Elongation min, % 200 mm (8 in) |
Elongation min, % 50 mm (2 in) |
| 485-620 (70-90) |
260 (38) |
17 |
21 |
Equivalent Material Grade of ASTM A515 Gr 60 Carbon Steel Sheets & Plates
| British Standard |
European Norm |
ASTM/ASME |
DIN |
| BS1501-161-430A |
EN10028 P265GH |
A/SA515 - Grade 60 |
DIN 17155 HII |
Basic Type of ASTM A515 Gr 60 Carbon Steel Sheets & Plates
ASTM A515 Gr 60 Carbon Steel Sheets & Plates
ASTM A515 Gr 60 Carbon Steel Sheets & Plates
ASTM A515 Gr 60 Carbon Steel Plates
Low ASTM A515 Gr 60 Carbon Steel Sheets
ASTM A515 Gr 60 Carbon Steel Sheets & Plates
Cold Rolled ASTM A515 Gr 60 Carbon Steel Sheets
16mm Thk Ms ASTM A515 Gr 60 Carbon Steels Plate
Hot Rolled ASTM A515 Gr 60 Carbon Steel Sheets
Mild ASTM A515 Gr 60 Carbon Steel Plate
Domestic Area
| Mumbai |
Ahmedabad |
Bhopal |
Bikaner |
Pune |
| Delhi |
Chennai |
Visakhapatnam |
Mangalore |
Nagpur |
| Bangalore |
Kolkata |
Siliguri |
Assam |
Indore |
| Hyderabad |
Surat |
Nashik |
Cochin |
Thane |
| Faridabad |
Rajkot |
Aurangabad |
Bhavnagar |
Ranchi |
| Mysore |
Coimbatore |
Tirupur |
Salem |
Bikaner |
| Bhubaneswar |
Raipur |
Ankleshwar |
Bhilai |
Bhiwandi |
| Vadodra |
Kochi |
People Also Search For
ASTM A515 Gr 60 Carbon Steel Sheets & Plates, ASTM A515 Gr 60 Carbon Steel No.4 Hairline Inox Sheets Manufacturers, ASTM A515 Gr 60 Carbon Steel Hot Rolled Plates Suppliers, ASTM A515 Gr 60 Carbon Steel Cold Rolled Plates Exporters,, ASTM A515 Gr 60 Carbon Steel No 4 Satin Finish Sheets Stockists, ASTM A515 Gr 60 Carbon Steel Shim Sheets in Belgium, ASTM A515 Gr 60 Carbon Steel Sheets & Plates Manufacturers in Belgium, ASTM A515 Gr 60 Carbon Steel Hot Rolled 2B finish 6mm Sheets Suppliers in Belgium, ASTM A515 Gr 60 Carbon Steel 4mm Cold Rolled Sheets & Plates Exporters in Belgium, ASTM A515 Gr 60 Carbon Steel Perforated Sheet Stockists in Belgium.
